You’ll be able to patch them much easier and, best of all, you’ll be able to leave everything patched in the back of your rack. These types of snakes require a stage rack, but you’ll get much more value out of them. Rack-mounted splitter snakes vs floor snakes I highly suggest you get a rack-mounted splitter snake. We have gone through two of these splitter snakes, but it was most likely because of other bands and stage crew accidentally stepping on the snake. They make great products, but I suggest that you stay away from any of their floor stage boxes. Seismic Audio is a company that prides itself on inexpensive gear. You can read how we did it and what we used here. We switched to in-ear monitors over two years ago. This allows your band to have your own monitor mixes, adjust your own EQ ( separate of FOH), add reverb and delays, and have total control of your on-stage in ear monitor mix. One of these XLR fans will be sent to the FOH engineer’s mixing desk and the other XLR fan will go into your monitor board. This piece of gear is essentially a regular audio snake outfitted with two XLR fan tails, effectively splitting the audio signal in two paths. The pricing on these splitter snakes is going to vary drastically, but it is worth it the higher up the price spectrum you go. What your band needs might not be what another does. One thing to note: there are many different options available. I’m writing this article to save your band time and money and not to make the same mistakes we made upon purchase our first one. When we purchased our splitter snake, we went through two poorly-made ( though abused on stage) ones before finding one that lasted the test of time. Go with rack-mounted, as this protects the snake from being stepped on while on stage. If you’re looking for an affordable splitter snake, check out this one from Seismic. You need a way to split the audio feed from all the microphones on stage to go your monitor board and to go to the front of house mixing board. This piece of audio gear is required for using a digital monitor board at live gigs (unless you bring your own FOH console). Picking a Splitter Snake for your Band’s IEM System My Personal Splitter Snake Recommendation.3) Whirlwind Audio Concert Systems Splitter Snake.The Best Splitter Snake for In-Ear Monitors at a Glance.Picking a Splitter Snake for your Band’s IEM System.The Stage Box is rack mountable for convenience and ease of transport. Each stage box is well labeled and constructed from heavy duty steel. You can plug an XLR or a 1/4" in to the box end of the snake. The cable ends on the fantails are all male XLR, while the stage box consists of all female XLR and 1/4" combo jacks. These splitter cables are straight send snakes and do not have any returns. These splitter snake cables do not have splitter transformers, ground-lift switches, or multi-pin disconnects. They each have a stage box and two hardwired short trunks with fantails. These snakes are your basic hardwired Y splitters. XLR connectors make this snake cable fit right in with professional power amps and mixing consoles without the need for converters or couplers. With this snake cable, each pair of heavy duty conductors is individually shielded, yielding crystal clear sound while rejecting extraneous noise. Simple hardwired Y splits | Stage box with two hardwired short trunks with fantails.High quality XLR / TRS 1/4" Combo Jacks at the box end.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |